Flotec FP0S2450A Manuel d'utilisation et d'entretien télécharger pdf (Page 4)

For parts or assistance, call Flotec Customer Service at 1-800-365-6832

OPERATION

Risk of electric shock. Do not handle a

pump or pump motor with wet hands or when

standing on wet or damp surface, or in water.

1. Shaft seal depends on water for lubrication. Do

not operate pump unless it is submerged in

water as seal may be damaged if allowed to run

dry.

2. Motor is equipped with automatic reset thermal

protector. If temperature in motor should rise

unduly, switch will cut off all power before dam-

age can be done to motor. When motor has

cooled sufficiently, switch will reset automatically

and restart motor. If protector trips repeatedly,

pump should be removed and checked as to

cause of difficulty. Low voltage, long extension

cords, clogged impeller, very low head or lift, or

a plugged or frozen discharge pipe, etc., could

cause cycling.

3. Pump will not remove all water. If operating a

pump manually, and suddenly no water comes

out of the discharge hose, shut off the unit

immediately. The water level is probably very low

and the unit has broken prime.

Risk of electric shock. Before attempt-

ing to check why unit has stopped operating,

disconnect power from unit.

Operation 4

Slip the float and then the rod stop

onto the rod past the second nib.

Mount the bracket onto the switch

housing.

Attach the switch to the pump as shown.

Vertical Switch Assembly

Rod

Rod Stop

Float

Bracket

Mounting

Screws

Switch

Housing

Insert the rod assembly up into the

switch housing and lock into place

with the pin.

NOTICE: Be sure the pin holds the

rod into the switch housing or the

pump will not shut off.

Do Not Change the

preset tether length.

3-1/2"

(89 mm)

Tethered Float Switch

NOTICE: For Model FPOS1800LTS, see instructions included with replacement switch, Part Number FPS17-66.

1 2 3 4 5 6 7 8 9 ... 18 19

Commentaires sur ces manuels

Pas de commentaire

Flotec FP0S2450A Manuel d'utilisation et d'entretien Page 4

Commentaires sur ces manuels